Fieldmann FZR 4010-B User Manual download pdf (Page 9)

PETROL LAWNMOWER USER'S MANUAL

Description of the machine | Assembly instructions | Operation

3. DESCRIPTION OF THE MACHINE

1. Switch / brake lever

2. Travel lever

3. Top part of the handle

4. Quick coupling screw

5. Bottom part of the handle

6. Grass catcher

7. Engine

8. Fuel primer bulb

9. Pull cord

10. Central mowing height adjustment lever

11. Lawnmower chassis

4. ASSEMBLY INSTRUCTIONS

WARNING! There exists a risk of damage to cables and subsequent operation of the lawnmower under

dangerous conditions if the handle is incorrectly folded or unfolded.

Do not damage the cables when folding or unfolding the lawnmower handle.

If a cable is damaged, contact an authorised service centre.

1. Take the top and bottom part of the handle out of the packaging, screw out the quick coupling screws on both

sides of the handle and connect both parts of the handle together (ﬁ gure 2).

2. Press the buttons on the handle (ﬁ gure 3).

3. Place 4 nuts on the bottom part of the handle (ﬁ gure 4).

4. Lift up the back cover of the lawnmower and hold it in the top position (ﬁ gure 5).

5. Insert the grass catcher into the groove in the rear part of the cover (ﬁ gure 6).

6. Release the rear cover.

5. OPERATION

1. Adding motor oil

1.1 Take out the oil dipstick (ﬁ gure 7).

1.2 Slowly pour oil into the ﬁ lling tube until the oil level reaches the "Full" (full) mark on the oil dipstick. Do not

overﬁ ll the tank.

1.3 Then screw the oil dipstick back into place.

Caution! Perform the ﬁ rst oil change after the ﬁ rst 2 hours of operation, then regularly change the oil once

a year. See chapter Changing the motor oil.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 87 88

No comments

Fieldmann FZR 4010-B User Manual Page 9