Fieldmann FVC 4001 EK User Manual download pdf (Page 6)

FVC 4001-EK / FVC 4002-EK

6EN Putting into operation | Operating instructions

Ensure that the distance between the switching ﬂ oat and the pawl holder is not too small. It is

not possible to guarantee correct operation when the gap is too small.

As soon as you set the switching ﬂ oat, check that it is not touching the underlay before the

pump turns off.

The activity position of the switching ﬂ oat can be set by adjusting the ﬂ oat in the holder of the

pawl.

ATTENTION! Danger of running when empty.

Note: The tank for the pump should have the minimum dimensions of 40 × 40 × 50 cm

(height × width × depth), for the ﬂ oat to freely move with the switch.

Connecting to the mains

Your new submersible pump is equipped with a power plug, preventing discharge, meeting strict

norms. The pump is designed to be connected to a safety power socket 230 V

50 Hz. Check

that it is in perfect condition. Insert the plug into the socket and the pump is ready for use.

ATTENTION! If the power cord or power plug are in any way damaged by an external

action, do not repair the power cord and contact an authorised service centre!

ATTENTION! This repair should only be performed by an authorised service centre.

4. OPERATING INSTRUCTIONS

Purpose of use

This pump may be used anywhere, where you wish to transfer water from one location to

another, e.g. at home, agriculture, gardening, plumbing and for many other applications.

This product is designed for private household use.

It is not suitable for professional use.

The submersible pump is suitable for work with water in a water distribution system and for

chlorinated pool water.

It is not suitable for work with waste water in sewage systems, salt water, aggressive or easily

combustible substances, for work in food processing or as a pump for water jets on garden

ponds.

It is not designed for pumping drinking water!

Instructions for use

ATTENTION! Before setting up the machine or carrying out maintenance on the machine,

or if the electric power cable has become jammed or is damaged, always disconnect it from

the electric power socket!

Note: Before using the submersible pump, please ﬁ rst carefully read all the safety

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Fieldmann FVC 4001 EK User Manual Page 6